How to Pair Skullcandy Method 540 ANC with Your Phone

By Skullcandy | Headphones, Earbuds, Gaming, and Speakers | Published: 2026-10-17

Category: How-to Guides

Follow these simple steps to pair your Skullcandy Method 540 ANC earbuds with an iPhone or Android phone, plus tips to avoid common Bluetooth pairing mistakes.

Quick answer

Put your Method 540 ANC earbuds in pairing mode by removing them from the case and holding the touch panel on both earbuds for 3 seconds until the LED flashes blue. Then open your phone's Bluetooth settings, find 'Skullcandy Method 540 ANC' in the list, and tap to connect.

Before you start

Make sure your earbuds are fully charged — a low battery can interrupt the pairing process. Also check that your phone's Bluetooth is turned on and that you're within about 30 feet (10 meters) of the earbuds with no thick walls or metal objects in between.

If pairing fails on the first try

If your phone doesn't find the earbuds, place both earbuds back in the case, close the lid, wait 10 seconds, then try again. If they still don't appear, forget any previous 'Skullcandy Method' devices in your phone's Bluetooth list and repeat the pairing steps from scratch.

Step-by-step pairing guide

Step 1: Put the earbuds in pairing mode: Remove both earbuds from the charging case. The LEDs should start blinking. If they don't, touch and hold the touch panel on both earbuds for 3 seconds until the LED flashes blue. Common mistake: Holding too long (over 5 seconds) may factory reset the earbuds instead of entering pairing mode.
Step 2: Open Bluetooth settings on your phone: Go to Settings > Bluetooth on your iPhone or Android phone. Make sure Bluetooth is toggled on. Wait a few seconds for the device list to refresh. Checkpoint: If you see 'Skullcandy Method 540 ANC' already listed but it won't connect, tap the 'i' icon (iOS) or gear icon (Android) and select 'Forget This Device' before proceeding.
Step 3: Select your earbuds from the list: Look for 'Skullcandy Method 540 ANC' under Other Devices or Available Devices. Tap it. You'll hear a tone in the earbuds confirming the connection, and the LED will turn solid white. If the name doesn't appear within 30 seconds, go back to Step 1 and re-enter pairing mode — the earbuds time out after about 2 minutes.
Step 4: Test the connection: Play a song or make a test call. Check that audio comes through both earbuds and that the controls (play/pause, volume) work. If only one earbud plays sound, place both back in the case and repeat Steps 1–3. For future use, the earbuds will auto-connect to your phone when you open the case — no need to repeat the full pairing process.

About the Skullcandy Method 540 ANC

Method® 540 ANC: Method 540 ANC brings together premium Bose sound, adaptive ANC, and a slimmer, lightweight, clip-anywhere case for maximum portability. Plus, it’s Skull AI compatible – your gateway to hands-free help and smarter listening, free 90-day trial. The adaptive ANC adjusts noise cancellation based on your environment, so you get clearer call quality and fewer distractions during pairing and everyday use.