How to Use Jib USB C Earbuds for Calls
By Skullcandy | Headphones, Earbuds, Gaming, and Speakers | Published: 2026-10-19
Category: How-to Guides
Learn how to make and take calls with Skullcandy Jib USB C earbuds. Step-by-step guide covering microphone use, call controls, and common mistakes.
Quick answer
Plug the Jib USB C into your device, use the inline remote to answer or end calls, and speak clearly into the microphone on the cable. No pairing or charging required.
Why Wired Earbuds Still Work Great for Calls
Wired earbuds like the Jib USB C offer a reliable call experience without battery anxiety or Bluetooth dropouts. The inline microphone sits close to your mouth, so your voice is picked up clearly even in moderately noisy environments. Because there is no wireless connection, you also avoid latency issues that can make conversations feel delayed.
The Jib USB C is designed for simplicity: plug it into a USB-C port on your phone, laptop, or tablet and the device immediately recognizes it as both audio output and a microphone. There are no settings to tweak or batteries to charge.
Limitations to Keep in Mind
The Jib USB C does not have active noise cancellation or a dedicated noise-filtering microphone. In very loud spaces, background sounds may bleed into your call. Additionally, because it relies on a wired USB-C connection, it will not work with devices that only have a 3.5 mm headphone jack unless you have an adapter that supports audio over USB-C.
How to Use Jib USB C Earbuds for Calls
- Plug into a USB-C port: Insert the USB-C connector firmly into your phone, laptop, or tablet. The device will automatically switch audio to the earbuds. No pairing or setup required. Make sure the USB-C port is clean and free of debris; a dirty port can cause intermittent audio or mic failure.
- Position the microphone correctly: The inline microphone module sits on the cable near your chin. Let the cable hang naturally so the mic is roughly level with your mouth. Do not pinch or cover the mic with clothing. If the caller says you sound muffled, adjust the mic position slightly closer to your mouth.
- Answer or end a call using the remote: Press the center button on the inline remote once to answer an incoming call. Press it again to end the call. To reject a call, press and hold the button for about two seconds. A single press also works to hang up; double-pressing may skip tracks instead, so avoid tapping too fast.
- Adjust volume during a call: Use the plus (+) and minus (-) buttons on the inline remote to raise or lower the call volume. These buttons work independently of your device's volume slider. If the volume seems too low, check that your device's media volume is also turned up, as some phones separate call and media volume.
- Mute yourself when needed: Most conferencing apps let you mute from the app interface. The Jib USB C inline remote does not have a dedicated mute button, so use the app's mute control or simply stop speaking. If you need to mute quickly, covering the microphone with your finger works in a pinch but may cause rustling noise.
Product details
- Jib® USB C: The Jib USB C features an inline mic and remote for call and media control. You can answer, end, or mute calls without touching your phone, making it safer when driving or working.
Jib® USB C
