How to Connect Skullcandy Session 540 to Two Devices at Once
By Skullcandy | Headphones, Earbuds, Gaming, and Speakers | Published: 2026-10-15
Category: How-to Guides
Connect your Skullcandy Session 540 to a laptop and phone at the same time with a clear Bluetooth multipoint setup. Follow these steps for smooth device switching.
Quick answer
To connect your Skullcandy Session 540 to two devices at once, first pair and connect it to your primary device (like your laptop). Then put the headphones back into pairing mode and connect to your second device (like your phone). The Session 540 supports Bluetooth multipoint, so it will remember both and let you switch between them automatically.
What you need before you start
Before setting up multipoint, make sure your Session 540 headphones are charged and both devices have Bluetooth turned on. You will also need to know how to put the headphones into pairing mode—usually by holding the power button until the LED flashes. If you have already paired the headphones with one device, that is fine; you can add a second device without removing the first. Keep both devices within a few feet during setup to avoid connection drops.
Step-by-step: connecting to two devices
Follow these steps in order. If a step fails, start over from the beginning to avoid partial pairings.
How multipoint switching works in daily use
Once both devices are connected, the Session 540 manages them automatically. When you get a call on your phone, the headphones will pause audio from your laptop and switch to the call. When the call ends, it returns to your laptop. For media, you typically need to pause on one device and press play on the other. Some apps may hold the connection, so if audio does not switch, pause the first device manually. This is normal for Bluetooth multipoint and not a defect.
Multipoint setup steps
- Pair with your first device: Turn on the Session 540 and put it in pairing mode. On your laptop or phone, go to Bluetooth settings and select 'Session 540' to connect. Checkpoint: The LED should stop flashing and you should hear a confirmation tone.
- Put the headphones back in pairing mode: Without turning them off, press and hold the power button again until the LED flashes rapidly. This makes the headphones discoverable for a second device. Common mistake: Turning the headphones off first will disconnect the first device. Keep them on.
- Pair with your second device: On your second device (e.g., phone), open Bluetooth settings and select 'Session 540'. It should connect alongside the first device. Checkpoint: Both devices should now show 'Connected' in their Bluetooth menus.
- Test automatic switching: Play audio on one device, then pause and play on the other. The headphones should switch automatically. For calls, answer on either device and the headphones will route the audio. If switching fails, unpair and repeat from step 1. Some older devices may not support multipoint.
Session 540 at a glance
- Crusher® 540 Active: Crusher 540 Active features adjustable sensory bass and a sweat and water-resistant nano-coating. If you want powerful bass for workouts, this model delivers it, but it does not have the open-ear awareness of the Push 540 Open.
- Push® 540 Open: Push 540 Open has secure over-ear hooks, open-ear sound, and a detachable neckband. This design keeps you aware of your surroundings, making it a better choice for outdoor runs or cycling where hearing traffic matters.
- Icon® 180: Icon 180 offers long battery life, a rugged build, and an ultra-comfortable on-ear fit. For all-day everyday use, this is a simple, durable option that does not require multipoint if you mainly use one device.
